Category: Networking
Reset Edge-Core ES series
This method of resetting I applied to three models of switches of this series (ES-3528M, ES-3526XA, ES-3552).
Connect the console cable (RS-232) to the switch. And configure the program through which you will connect with the following parameters COM-port: 9600 8N1;
Turn on the power on the switch.
Quickly press Ctrl+U and after passing the POST (self-test) should appear a message about entering the password:
User Mode
— Performing Power-On Self Tests (POST) —
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
———————— DONE -—————————
Password :
(the field is quickly filled with asterisks, such as— "********" , so do not delay and enter the password, or copy to the clipboard, and after the request, press Shift+Insert ). Enter the password mercury click on Enter and then you should see a list of files in the memory of the switch:
File Name S/Up Type Size Create Time
———————————————- -- — -——- -————
$binary_cfg_file.bin 0 10 128000 26:01:06
$binary_cfg_file_internal.bin 0 10 128000 26:00:59
$logfile_1 0 3 704 3512:03:42
ES3528_52M_diag_V1.0.0.8.bix 1 1 1383604 00:01:21
ES3528_52M_opcode_V1.4.7.1.bix 1 2 4836964 84136:21:05
Factory_Default_Config.cfg 0 5 455 24:00:51
certificate 0 8 32640 24:00:43
startuping.cfg 1 5 12568 2638:38:04
———————————————- -- — -——- -———-
Free Space : 9043968
[X]modem Download [D]elete File [S]et Startup File
[C]hange Baudrate [Q]uit
Select>
Remove the previously created configuration by pressing the D button:
File name to delete : startuping.cfg
This is starup file, you sure you want to delete it (y/n) ?y
Confirm by pressing y.
Press q to exit.
The switch reboots. After rebooting, enter the default username and password is admin/admin.
Posted: 2013-06-24
Comments